Il`ina T.N.

Doctor of Engineering Sciences (Advanced Doctor), Professor, Belgorod State Technological University named after V.G. Shukhov, Russia

TEST OF HEAT PUMP UNIT WITH MOVEBIT ANTI-ICING SYSTEM

https://doi.org/10.58224/2618-7183-2022-5-2-43-50
Аннотация
Use of heat pump units is one of the directions for introducing energy-saving technologies into engineering systems. Air heat pumps are more promising than geothermal ones, but their use in cold climates is limited by formation of frost on the evaporator heat exchanger. This paper presents a heat pump unit with a system for breaking ice with using oscillatory circuits. The air heat pump unit with MOVEBIT anti-icing system, including the oscillatory circuit, has been developed. It was tested in the temperature range from -26 up to +10 . The transformer ratio is determined as the ratio of the heat received to the operation expended. The calculation of heat output was carried out using a computer program that includes the flow main parameters. The calculated and experimental values of the coefficients are compared. Studies have shown that a change in the temperature of the air entering the evaporator of the pumping unit with the anti-icing system does not significantly affect the energy efficiency of the equipment under test. The MOVEBIT outdoor air heat pump allows to obtain a conversion factor in the range of 4-6 when operating in areas with outdoor temperatures down to -27 and can compete with geothermal heat pumps. Measurements of the sound impact of the anti-icing system showed the need to reduce it by 30 %.
PDF

INFLUENCE OF MATERIAL STRUCTURE ON THE MAGNETOSTRICTIVE PROPERTIES OF A RADIATOR FOR DEFROSTING HEAT EXCHANGERS OF VENTILATION EQUIPMENT

https://doi.org/10.34031/2618-7183-2021-4-4-5-10
Аннотация
The article deals with the properties of ferromagnetics and their behaviour in an external magnetic field. The conditions under which magnetism occurs in materials are shown and the choice of material for a magne-tostrictive emitter is justified. The composition and properties of permendur as the most suitable material for the manufacture of magnetostrictive radiators are presented. It is shown that for the manufacture of the magnetostrictor it is feasible to use electro-erosion equipment for cutting packages from permendur compared to the costly and cumbersome method of stamping in a matrix of a particular shape. Tests were carried out on a duralumin heat exchanger with artificial frostbite. The evaporator was fed with refrigerant at 0.22 MPa, which corresponds to the boiling point of R 410a refrigerant at 35°C, by means of a refrigerant line made of aluminium pipes. Frostbite was then produced by applying moist air using an ultrasonic steam generator. Frost on the evaporator surface is discharged by means of a magnetostrictor mounted on the heat exchanger. The proposed method allows for the most effective cleaning of the surfaces of heat exchangers of ventilation equipment from scale, fouling and other mechanical deposits by means of mechanical vibrations.
PDF