Русский
English
Concrete for ambitious engineering projects, including bridges, must meet certain requirements related to strength, water resistance, frost resistance and plasticity. The objective of the article is to improve the efficiency of concrete for bridge structures. The compositions of high-strength building composites have been optimized with a reduction in the proportion of the clinker component. The densest packing of filler particles has been achieved, providing a self-compacting effect during hardening. The compositions of building composites have been optimized at the macro-, micro- and nanolevels to obtain a high-density matrix packing and increase the strength of the composite (including taking into account the granulometric analysis of fillers and the choice of superplasticizer). New properties of high-strength building composites (rheology of highly concentrated dispersed systems, shrinkage deformations, workability, setting time, etc.) have been studied. The results of fresh properties of the developed mixtures showed their compliance with the P5 grade, which indicates that they have good transportability to the place of manufacture of bridge structures. The study of the physical and mechanical characteristics of cement composites (average density, porosity, compressive and bending strength, elastic modulus, frost resistance, shrinkage, Poisson's ratio) showed that the obtained materials can be effectively used for the construction of critical structures, including bridges.
1. Laaksonen A., Mäntyranta L. Integral bridge simulator – test series and comparison with design models and bridge monitoring results. Proceedings of the Institution of Civil Engineers – Bridge Engineering 2025. 7. https://doi.org/10.1680/jbren.24.00005
2. Fediuk R., Yushin A. Composite binders for concrete with reduced permeability. IOP Conference Series-Materials Science and Engineering. 2016. 116. 012021. https://doi.org/10.1088/1757-899X/116/1/012021
3. Silva Y.F., Burbano-Garcia C., Araya-Letelier G., Izquierdo S. Sulfate attack performance of concrete mixtures with use of copper slag as supplementary cementitious material. Case Studies in Construction Materials. 2025. 22. e04846. https://doi.org/10.1016/j.cscm.2025.e04846
4. Kharun M., Klyuev S., Koroteev D., Chiadighikaobi P.C., Fediuk R., Olisov A., Vatin N., Alfimova N. Heat treatment of basalt fiber reinforced expanded clay concrete with increased strength for cast-in-situ construction. Fibers 2020. 8 (11). 0067. P. 1 – 16. https://doi.org/10.3390/fib8110067
5. Chen H., Soles J.A., Malhotra V.M. Investigations of supplementary cementing materials for reducing alkali-aggregate reactions. Cement and Concrete Composites. 1993. 15. P. 75 – 85.
6. Villagran-Zaccardi Y., Horckmans L., Peys A. Performance of mortar and concrete containing artificial aggregate from cold-bonded sulphidic mine tailings. Construction and Building Materials. 2023. 409. 134049. https://doi.org/10.1016/j.conbuildmat.2023.134049
7. Cao J., Chung D.D.L. Colloidal graphite as an admixture in cement and as a coating on cement for electromagnetic interference shielding. Cement and Concrete Research 2003. 33. P. 1737 – 1740.
8. Makul N., Fediuk R., Amran M., Zeyad A.M., Klyuev S., Chulkova I., Ozbakkaloglu T., Vatin N., Karelina M., Azevedo A. Design Strategy for Recycled Aggregate Concrete: A Review of Status and Future Perspectives. Crystals. 2021. 11. 695. https://doi.org/10.3390/ cryst11060695
9. Li Y., Li W., Tan K.H., Sheng J., Yu M. Characterization of permeability of seawater iron tailings mortar based on inter-pore connection. Construction and Building Materials. 2023. 409. 134135. https://doi.org/10.1016/j.conbuildmat.2023.134135
10. Levkina E.V., Titova N.Y. The Analysis of the Financial Condition of Small Business and the Ways of its Development in the Primorsky Territory. IOP Conference Series: Earth and Environmental Science. 2019. 272 (3). 032185. https://doi.org/10.1088/1755-1315/272/3/032185
11. Younis A., Ebead U., Suraneni P., Nanni A. Fresh and hardened properties of seawater-mixed concrete. Construction and Building Materials. 2018. 190. P. 276 – 286. https://doi.org/ 10.1016/j.conbuildmat.2018.09.126
12. Fediuk R.S., Smoliakov A.K., Timokhin R.A., Batarshin V.O., Yevdokimova Y.G. Using thermal power plants waste for building materials. IOP Conference Series: Earth and Environmental Science. 2018. 87 (9). 092010. https://doi.org/10.1088/1755-1315/87/9/092010
13. Bangaru S.S., Wang C., Zhou X., Hassan M. Scanning electron microscopy (SEM) image segmentation for microstructure analysis of concrete using U-net convolutional neural network, Automation in Construction, 2022. 144. 104602. https://doi.org/10.1016/j.autcon.2022.104602
14. Fediuk R.S., Yevdokimova Y.G., Smoliakov A.K., Stoyushko N.Y., Lesovik V.S. Use of geonics scientific positions for designing of building composites for protective (fortification) structures. IOP Conference Series: Materials Science and Engineering. 2017. 221 (1). 012011. https://doi.org/10.1088/1757-899X/221/1/012011
15. Elinwa A.U., Umar, M. X-ray diffraction and microstructure studies of gum Arabic-cement concrete, Construction and Building Materials. 2017. 156. P. 632 – 638. https://doi.org/ 10.1016/j.conbuildmat.2017.08.162
16. Fediuk R.S., Lesovik V.S., Mochalov A.V., Otsokov K.A., Lashina I.V., Timokhin R.A. Composite binders for concrete of protective structures. Magazine of Civil Engineering. 2018. 82(6), P. 208-218. https://doi.org/10.18720/MCE.82.19
17. Dong R., Liu M., Wang X. Investigation on fatigue performance of precast fiber-reinforced concrete track bridge piers. Construction and Building Materials. 2025. 494. 143336. https://doi.org/10.1016/j.conbuildmat.2025.143336
18. Fediuk R., Amran M., Klyuev S., Klyuev A. Increasing the performance of a fiber-reinforced concrete for protective facilities. Fibers. 2021. 9(11). 64.
19. Yu S.H., Wan S.C., Liu C., Zhou X.J., Guo X. Low-Velocity Impact Response and Collision Resistance of Basalt Fiber Reinforced Concrete Bridge Structures. KSCE Journal of Civil Engineering. 2025. 100368. https://doi.org/10.1016/j.kscej.2025.100368
20. Klyuev S., Fediuk R., Ageeva M., Fomina E., Klyuev A., Shorstova E., Sabitov L., Radaykin O., Anciferov S., Kikalishvili D., de Azevedo Afonso R.G., Vatin N. Technogenic fiber wastes for optimizing concrete. Materials. 2022. 15 (14). 5058.
21. Wang K., Wang B., Guo J., Meng Q., Feng H. Sharpey's fiber-inspired gradient anchoring and multiscale synergistic modification of the new–old concrete interface for bridge widening applications. Developments in the Built Environment. 2025. 23. 100750. https://doi.org/10.1016/j.dibe.2025.100750
22. Miao P., Wei C., Wang W., Qu C., Y.Wu, Z. Wang, T. Srimahachota. Performance assessment of fiber-reinforced PCM for coastal concrete bridge repairs from material to structural level. Construction and Building Materials, 2025. 490. 142617. https://doi.org/10.1016/j.conbuildmat.2025.142617
23. Klyuev S., Fediuk R., Ageeva M., Fomina E., Klyuev A., Shorstova E., Zolotareva S., Shchekina N., Shapovalova A., Sabitov L. Phase formation of mortar using technogenic fibrous materials. Case Studies in Construction Materials. 2022. 16. e01099
24. Zhang Y., Li G., Chen Z. Effect of pore water freezing on the natural frequency of concrete girder bridges. Engineering Structures. 2025. 345 (A). 121432. https://doi.org/10.1016/j.engstruct.2025.121432
25. Yang G., Zhao J., Xu X., Li Z., Li X. Study on temperature distribution characteristics of steel-shell concrete tower in double-deck steel truss suspension bridge under tanker fire. Engineering Structures. 2025. 345 (A). 121500. https://doi.org/10.1016/j.engstruct.2025.121500
26. Amran M., Fediuk R., Klyuev S., Qader D.N. Sustainable development of basalt fiber-reinforced high-strength eco-friendly concrete with a modified composite binder. Case Studies in Construction Materials. 2022. 17. e01550.
27. Wei K., Wang J., Xing S. Investigation into the abrasion damage of concrete bridge pier based on the three-dimensional optical point cloud measurement. Structures. 2025. 80. 110067. https://doi.org/10.1016/j.istruc.2025.110067
28. Wang C., Yang G. Cable anchorage of steel-concrete composite bridge towers: cracking and bearing resistances. Ocean Engineering. 2025. 341 (4). 122733. https://doi.org/10.1016/j.oceaneng.2025.122733
29. Zhang N., Sanjayan J. Concrete 3D printing and digital fabrication technologies for bridge construction. Automation in Construction. 2025. 179. 106485. https://doi.org/10.1016/j.autcon.2025.106485
30. Klyuev S., Klyuev A., Fediuk R., Ageeva M., Fomina E., Amran M., Murali G. Fresh and mechanical properties of low-cement mortars for 3D printing. Construction and Building Materials. 2022. 338. 127644. DOI:10.1016/j.conbuildmat.2022.127644
2. Fediuk R., Yushin A. Composite binders for concrete with reduced permeability. IOP Conference Series-Materials Science and Engineering. 2016. 116. 012021. https://doi.org/10.1088/1757-899X/116/1/012021
3. Silva Y.F., Burbano-Garcia C., Araya-Letelier G., Izquierdo S. Sulfate attack performance of concrete mixtures with use of copper slag as supplementary cementitious material. Case Studies in Construction Materials. 2025. 22. e04846. https://doi.org/10.1016/j.cscm.2025.e04846
4. Kharun M., Klyuev S., Koroteev D., Chiadighikaobi P.C., Fediuk R., Olisov A., Vatin N., Alfimova N. Heat treatment of basalt fiber reinforced expanded clay concrete with increased strength for cast-in-situ construction. Fibers 2020. 8 (11). 0067. P. 1 – 16. https://doi.org/10.3390/fib8110067
5. Chen H., Soles J.A., Malhotra V.M. Investigations of supplementary cementing materials for reducing alkali-aggregate reactions. Cement and Concrete Composites. 1993. 15. P. 75 – 85.
6. Villagran-Zaccardi Y., Horckmans L., Peys A. Performance of mortar and concrete containing artificial aggregate from cold-bonded sulphidic mine tailings. Construction and Building Materials. 2023. 409. 134049. https://doi.org/10.1016/j.conbuildmat.2023.134049
7. Cao J., Chung D.D.L. Colloidal graphite as an admixture in cement and as a coating on cement for electromagnetic interference shielding. Cement and Concrete Research 2003. 33. P. 1737 – 1740.
8. Makul N., Fediuk R., Amran M., Zeyad A.M., Klyuev S., Chulkova I., Ozbakkaloglu T., Vatin N., Karelina M., Azevedo A. Design Strategy for Recycled Aggregate Concrete: A Review of Status and Future Perspectives. Crystals. 2021. 11. 695. https://doi.org/10.3390/ cryst11060695
9. Li Y., Li W., Tan K.H., Sheng J., Yu M. Characterization of permeability of seawater iron tailings mortar based on inter-pore connection. Construction and Building Materials. 2023. 409. 134135. https://doi.org/10.1016/j.conbuildmat.2023.134135
10. Levkina E.V., Titova N.Y. The Analysis of the Financial Condition of Small Business and the Ways of its Development in the Primorsky Territory. IOP Conference Series: Earth and Environmental Science. 2019. 272 (3). 032185. https://doi.org/10.1088/1755-1315/272/3/032185
11. Younis A., Ebead U., Suraneni P., Nanni A. Fresh and hardened properties of seawater-mixed concrete. Construction and Building Materials. 2018. 190. P. 276 – 286. https://doi.org/ 10.1016/j.conbuildmat.2018.09.126
12. Fediuk R.S., Smoliakov A.K., Timokhin R.A., Batarshin V.O., Yevdokimova Y.G. Using thermal power plants waste for building materials. IOP Conference Series: Earth and Environmental Science. 2018. 87 (9). 092010. https://doi.org/10.1088/1755-1315/87/9/092010
13. Bangaru S.S., Wang C., Zhou X., Hassan M. Scanning electron microscopy (SEM) image segmentation for microstructure analysis of concrete using U-net convolutional neural network, Automation in Construction, 2022. 144. 104602. https://doi.org/10.1016/j.autcon.2022.104602
14. Fediuk R.S., Yevdokimova Y.G., Smoliakov A.K., Stoyushko N.Y., Lesovik V.S. Use of geonics scientific positions for designing of building composites for protective (fortification) structures. IOP Conference Series: Materials Science and Engineering. 2017. 221 (1). 012011. https://doi.org/10.1088/1757-899X/221/1/012011
15. Elinwa A.U., Umar, M. X-ray diffraction and microstructure studies of gum Arabic-cement concrete, Construction and Building Materials. 2017. 156. P. 632 – 638. https://doi.org/ 10.1016/j.conbuildmat.2017.08.162
16. Fediuk R.S., Lesovik V.S., Mochalov A.V., Otsokov K.A., Lashina I.V., Timokhin R.A. Composite binders for concrete of protective structures. Magazine of Civil Engineering. 2018. 82(6), P. 208-218. https://doi.org/10.18720/MCE.82.19
17. Dong R., Liu M., Wang X. Investigation on fatigue performance of precast fiber-reinforced concrete track bridge piers. Construction and Building Materials. 2025. 494. 143336. https://doi.org/10.1016/j.conbuildmat.2025.143336
18. Fediuk R., Amran M., Klyuev S., Klyuev A. Increasing the performance of a fiber-reinforced concrete for protective facilities. Fibers. 2021. 9(11). 64.
19. Yu S.H., Wan S.C., Liu C., Zhou X.J., Guo X. Low-Velocity Impact Response and Collision Resistance of Basalt Fiber Reinforced Concrete Bridge Structures. KSCE Journal of Civil Engineering. 2025. 100368. https://doi.org/10.1016/j.kscej.2025.100368
20. Klyuev S., Fediuk R., Ageeva M., Fomina E., Klyuev A., Shorstova E., Sabitov L., Radaykin O., Anciferov S., Kikalishvili D., de Azevedo Afonso R.G., Vatin N. Technogenic fiber wastes for optimizing concrete. Materials. 2022. 15 (14). 5058.
21. Wang K., Wang B., Guo J., Meng Q., Feng H. Sharpey's fiber-inspired gradient anchoring and multiscale synergistic modification of the new–old concrete interface for bridge widening applications. Developments in the Built Environment. 2025. 23. 100750. https://doi.org/10.1016/j.dibe.2025.100750
22. Miao P., Wei C., Wang W., Qu C., Y.Wu, Z. Wang, T. Srimahachota. Performance assessment of fiber-reinforced PCM for coastal concrete bridge repairs from material to structural level. Construction and Building Materials, 2025. 490. 142617. https://doi.org/10.1016/j.conbuildmat.2025.142617
23. Klyuev S., Fediuk R., Ageeva M., Fomina E., Klyuev A., Shorstova E., Zolotareva S., Shchekina N., Shapovalova A., Sabitov L. Phase formation of mortar using technogenic fibrous materials. Case Studies in Construction Materials. 2022. 16. e01099
24. Zhang Y., Li G., Chen Z. Effect of pore water freezing on the natural frequency of concrete girder bridges. Engineering Structures. 2025. 345 (A). 121432. https://doi.org/10.1016/j.engstruct.2025.121432
25. Yang G., Zhao J., Xu X., Li Z., Li X. Study on temperature distribution characteristics of steel-shell concrete tower in double-deck steel truss suspension bridge under tanker fire. Engineering Structures. 2025. 345 (A). 121500. https://doi.org/10.1016/j.engstruct.2025.121500
26. Amran M., Fediuk R., Klyuev S., Qader D.N. Sustainable development of basalt fiber-reinforced high-strength eco-friendly concrete with a modified composite binder. Case Studies in Construction Materials. 2022. 17. e01550.
27. Wei K., Wang J., Xing S. Investigation into the abrasion damage of concrete bridge pier based on the three-dimensional optical point cloud measurement. Structures. 2025. 80. 110067. https://doi.org/10.1016/j.istruc.2025.110067
28. Wang C., Yang G. Cable anchorage of steel-concrete composite bridge towers: cracking and bearing resistances. Ocean Engineering. 2025. 341 (4). 122733. https://doi.org/10.1016/j.oceaneng.2025.122733
29. Zhang N., Sanjayan J. Concrete 3D printing and digital fabrication technologies for bridge construction. Automation in Construction. 2025. 179. 106485. https://doi.org/10.1016/j.autcon.2025.106485
30. Klyuev S., Klyuev A., Fediuk R., Ageeva M., Fomina E., Amran M., Murali G. Fresh and mechanical properties of low-cement mortars for 3D printing. Construction and Building Materials. 2022. 338. 127644. DOI:10.1016/j.conbuildmat.2022.127644
Lesovik V.S., Fediuk R.S., Kazlitina О.V., Ryapukhin А.N., Shangutov A.О., Gitman Y.K. Improving the performance of concrete for bridge structures. Construction Materials and Products. 2025. 8 (6). 2. https://doi.org/10.58224/2618-7183-2025-8-6-2