English English

Vol. 3 Issue 4

Archives Journal Construction Materials and Products Vol. 3 Issue 4

DEVELOPMENT OF SPECIAL RECIPES OF BINDING COMPOSITIONS WITH IMPROVED PROPERTIES

https://doi.org/10.34031/2618-7183-2020-3-4-5-12
, ,
 5-12 p.
Abstract
Abstract: the ecological safety of earthly civilization suffers from the accumulation of huge volumes of industrial waste, the natural resource potential is decreasing, therefore, special attention is paid to the development of less costly and low energy-intensive technologies for obtaining new building materials, the implementation of which does not require high-temperature and expensive technological processing, and will allow the use of secondary and substandard raw materials.
The work presents the results of the development of special formulations of binder compositions of alkaline activation based on cement production wastes in the form of aspiration and clinker dust from electrostatic precipitators of rotary kilns and waste from the metallurgical industry - ferrosilicon additives in the form of active silica, which will allow obtaining new building materials with improved properties.
The paper investigates the properties of an alkaline cement paste and cement stone, reveals issues related to the theoretical foundations of the formation of the structure and strength of an artificial stone based on an alkaline activator. The research results, in our opinion, are certainly of practical importance for the construction industry, as the proposed formulations of clinker-free cements can partially replace expensive and energy-intensive Portland cement, making it possible to create strong and durable concrete and reinforced concrete structures.
PDF

RESEARCH ON THE STRUCTURE OF CLAY RAW MATERIALS FOR CERAMIC PRODUCTS

https://doi.org/10.34031/2618-7183-2020-3-4-13-23
,
 13-23 p.
Abstract
Abstract: the research uses some methods for determining materials, strictly applying the current standards and requirements of the Russian Federation. The degree of scientific development of this research is that specialists of the Department of Engineering Physics and Materials Physics of Engineering Faculty of Bashkir State University and the laboratory of JSC "Ceramics" of the Republic of Bashkortostan conducted research in the field of ceramic materials science for construction purposes. The methodological basis of the research is based on well-known methods of studying the structure of clay raw materials suitable for the production of construction products, with the choice of a stable light range of products and eliminates cracking in the technological process of brick production. The correct composition leads to a reduction in energy consumption without compromising the physical and mechanical characteristics of products.
PDF

INCREASING THE EFFICIENCY OF MINERAL POWDER FROM TECHNOGENIC RAW MATERIALS DUE TO ITS HYDROPHOBIZATION

https://doi.org/10.34031/2618-7183-2020-3-4-24-30
, , ,
 24-30 p.
Abstract
Abstract: a promising direction in solving the problem of obtaining high-quality asphalt concrete is the use of mineral fillers, including from industrial waste.
The article considers the use of OEMK slag as a mineral powder in the asphalt concrete mix.
The influence of hydrophobization of mineral powder by GF Preparation on moisture absorption and its structuring ability to change the maximum shear stress from the content of mineral powder before and after hydrophobization was studied. It is established that the treatment of the filler provides the necessary hydrophobicity of the mineral material, reduces the bituminous capacity, water saturation, porosity of the asphalt binder, and increases its strength and water resistance. The results of studies of the main characteristics of asphalt concrete on the example of a mixture of type G III of the brand showed that as a result of hydrophobization, the strength, water resistance, water saturation, and swelling of the composite significantly increase.
PDF

NON-PLASTIC RAW MATERIALS FOR THE PRODUCTION OF CONSTRUCTION CERAMICS

https://doi.org/10.34031/2618-7183-2020-3-4-31-38
,
 31-38 p.
Abstract
Abstract: research by some scientists shows that the most expensive element in the manufacture of construction ceramics are clay materials, in particular kaolins. They allow getting products with high strength, but at the same time increase significantly the mass refractoriness. In this connection, a significant amount of melt is added or the firing temperature is increased. Of course, this leads to an increase in the cost of products. In Russia, the reserves of these raw materials are insufficient and it is advisable to look for new non-traditional types of raw materials. There is a need to adjust the component composition of ceramic masses and use non-plastic raw materials. An example is natural wollastonites or their analogues in the form of diopside, which are a little-used type of mineral raw material. In the Siberian region, there are several deposits of non-plastic varieties of raw materials for the production of fired construction products. The most famous are the deposits of the Slyudyansky and Sayan districts. The authors present the results of analysis of diopside rocks, where the chemical, mineral compositions and behavior of samples under heating are studied. The absence of alkali and alkaline earth metal oxides in diopsides was determined. The content of iron oxide in the amount of 0.1% indicates the purity of the raw material. More than half of the composition is occupied by silica, which is 53% and 58% in the rocks of the Burutuysky and Sayan deposits, respectively. The basis of the mineral composition of the samples is diopside, with the presence of quartz, calcite, mica and magnesium carbonate. This range of minerals is traditional in many charges of ceramic materials. Therefore, the possibility of using diopside rocks in the production of building ceramic materials is quite high.
PDF

ON INTEGRATED HEATING, VENTILATION AND AIR CONDITIONING SYSTEMS IN ROOMS OF SHOPPING CENTERS

https://doi.org/10.34031/2618-7183-2020-3-4-39-47
, ,
 39-47 p.
Abstract
Abstract: the paper considers a method for creating microclimate parameters in the rooms of shopping centers, sports complexes, etc. The possibility of using a complex system including air heating, ventilation and air conditioning is shown on the example of a shopping hall. To improve the efficiency of the system, it is proposed to replace traditional water heating with air heating, which works by using a gas burner-heat exchanger. For the rooms of a shopping center in the city of Saint Petersburg, the thermal engineering calculation of external fences was performed, and the heat capacity of the heating system was determined. Based on the results of the heat and air balance of the grocery shopping area, the performance of the ventilation and air conditioning system is calculated. An autonomous monoblock unit for air treatment was selected. During the cold period, the unit performs the functions of air heating and ventilation. Air recirculation is provided to save heat energy. The amount of outdoor and recirculating air is calculated. During the warm period, air is cooled and dehumidified by using a compression refrigeration cycle. The proposed integrated system for creating the required parameters of the microclimate allows reducing material costs by using a gas burner-heat exchanger instead of a heat point for water heating, as well as using a cheaper energy source and heat recovery through a heat pump.
PDF