English English

Vol. 3 Issue 5

Archives Journal Construction Materials and Products Vol. 3 Issue 5

PERFORMANCES OF HIGH POROUS CELLULAR CONCRETE

https://doi.org/10.34031/2618-7183-2020-3-5-5-14
, , ,
 5-14 p.
Abstract
The widespread use of cellular concrete for enclosing structures forces researchers to develop ways to improve their performance and durability. Compositions of aerated and foam concrete with the use of waste heat power engineering have been developed. The optimal formulation ratios have been identified that contribute to the creation of a rigid interpore matrix and water-repellent pore protection. The regularities of the synthesis of aerated concrete and foam concrete were established, which consist in optimizing the processes of structure formation through the use of a polymineral cement-ash binder and a pore-forming agent. The mix composition intensifies the process of hydration of the system, which leads to the synthesis of a polymineral highly porous heterodispersed matrix. The increased activity and granulometry of aluminosilicates predetermine an increase in the number of contacts and mechanical adhesion between particles during compaction, strengthening the framework of the interpore partitions. The mechanism of the influence of the composition of the concrete mix on the microstructure of the composite is established. The calculated sound insulation of airborne noise shows sufficient characteristics for using aerated concrete blocks as enclosing structures. One of the main advantages of aerated concrete is its low thermal conductivity, which is especially important from the point of view of ensuring the energy efficiency of buildings and structures. Even in spite of the high values of open porosity of the developed aerated concrete, the rigid frame makes it possible to achieve almost 2 times higher frost resistance characteristics than that of the reference specimen.
PDF

DETERMINATION OF RHEOLOGICAL PARAMETERS OF POLYMERIC MATERIALS USING NONLINEAR OPTIMIZATION METHODS

https://doi.org/10.34031/2618-7183-2020-3-5-15-23
, ,
 15-23 p.
Abstract
The article is devoted to the problem of processing the experimental creep curves of polymers. The task is to determine their rheological characteristics from tests for any of the simplest types of deformation. The basis for the approximation of the experimental curves is the nonlinear Maxwell-Gurevich equation.
The task of finding the rheological parameters of the material is posed as a nonlinear optimization problem. The objective function is the sum of the squared deviations of the experimental values on the creep curve from the theoretical ones. Variable input parameters of the objective function are the initial relaxation viscosity and velocity modulus m*. A theoretical creep curve is constructed numerically using the fourth-order Runge-Kutta method. The nonlinear optimization problem is solved in the Matlab environment using the internal point method. The values m* and are found for which the objective function takes the minimum value.
To test the technique, the inverse problem was solved. For given values of the rheological parameters of the material, a theoretical curve of creep under bending was constructed, and the values m* and were found from it. The technique was also tested on experimental stress relaxation curves of secondary polyvinyl chloride and creep curves of polyurethane foam with a pure shear.
A higher quality approximation of experimental curves is shown in comparison with existing methods. The developed technique allows us to determine the rheological characteristics of materials from tests for bending, central tension (compression), torsion, shear, and it is enough to test only one type of deformation, and not a series, as was suggested earlier by some researchers.
PDF

DEVELOPMENT OF RADIATION-PROOF CONCRETE COMPOSITIONS

https://doi.org/10.34031/2618-7183-2020-3-5-24-33
, , , ,
 24-33 p.
Abstract
The article considers the possibility of using composite binders and magnetite as components of concrete with radiation-proof properties. The use of the developed concrete is possible not only when it is necessary to build nuclear power plants, but also to create bunkers or anti-radiation shelters. A special feature of con-cretes used for the protection and design of nuclear reactor cranes is their properties, which they must have. These properties include: low thermal conductivity, increased density, high temperature resistance, reduced values of the coefficient of thermal expansion, shrinkage and creep. Technogenic raw materials for the production of very heavy concrete are studied, the main physical and mechanical characteristics, the requirements that need to be considered in the selection of raw mix composition for protective concrete are analyzed. The paper presents a comparison of physical and mechanical characteristics, the advantages and disadvantages of introducing a binder of various types: cement, cement with a superlasticizer and a binder of low water consumption. It was found that the use of a low-water-consumption binder increases the physical and mechanical characteristics while reducing the consumption of cement in the raw material mix compared to traditional heavy concrete with cement.
PDF

EFFECT OF WOLLASTONITE ON THE MECHANICAL CHARACTERISTICS OF CONCRETE

https://doi.org/10.34031/2618-7183-2020-3-5-34-42
, , , , ,
 34-42 p.
Abstract
Improvement of the physical and mechanical properties of cement composites should be accompanied by the disposal of industrial waste of various generation. Therefore, the paper proposes the principles of con-trolling the strength properties of concrete, which consist in the complex effect of wollastonite obtained from boron production waste on the processes of structure formation of the cement matrix. When this introduced in an amount of 2-8 wt. % wollastonite has a dual function as a mineral filler and a reinforcing fiber. It has been proven that in the presence of wollastonite, the concrete mix becomes lighter without reducing its physical and mechanical properties. It was revealed that the early strength for all the developed compositions with the addition of wollastonite increases due to the acceleration of hydration processes. Calcium silicate, which is wollastonite CaSiO3, has a close chemical composition with cement clinker, especially with Ca2SiO4 belite and Ca3SiO5 alite. This leads to the formation of a chemically homogeneous and, as a result, hardened microstructure. Elongated wollastonite fibers with good adhesion to the cement stone provide effective micro-reinforcement of the concrete composite. Using the results will lead to the possibility of designing high-strength concretes, including for special structures.
PDF