PLASMOCHEMICAL MODIFICATION OF WALL BUILDING MATERIALS

https://doi.org/10.34031/2618-7183-2018-1-2-11-18
The aim of the work is to study the effect of a high-temperature plasma torch on the processes of phase transformations and layer-by-layer modification of the protective and decorative coating on concrete using as a filler a mixture of quartz sand and hollow glass microspheres. The main tasks included: investigation of the processes of evaporation and thermal diffusion of oxides of plasma-coated coatings; study of phase transformations in the melt and its subsequent crystallization in the process of rapid spontaneous cooling of the fused protective and decorative coating; study of the effect of sodium liquid glass on the processes of polymorphic transformations of alumina and the formation of micro-wicks due to the intense diffusion of sodium oxide; study of operational characteristics of protective and decorative coatings. It was established that the initial phases in the protective-decorative coating are α-Al2O3 and CaO∙6Al2O3 (β-Al2O3), and the liquid sodium glass in the coating leads additionally to the formation of Na2O∙11Al2O3. The top layer of the protective and decorative coating is Na–Ca–Al–Si glass with regions of heterogeneities containing an increased content of sodium oxide. The content of aluminum oxide in the protective and decorative coating based on the battle of high-alumina refractory was 95.1 %. The introduction into the coating composition of sodium liquid glass minimizes the processes of dehydration of the binding component and changes the chemical composition of the protective and decorative coating. Reduction of the aluminum oxide content to 83.0 % affects the microhardness indicators. Microhardness of the concrete surface due to the introduction of liquid glass is reduced from 2510 HV to 887 HV.
1. Akulova M.V., Fedosov S.V. Atmospheric and corrosion resistance ingrease of concrete by plasma spaying of zink. Problemy naukowo-badawcze budownietwa: XLIII Konferencja naukowa. Poznan: Krynia, 1997. VI. P. 5 – 7.
2. Fedosov S.V., Akulova M.V., SHCHepochnika YU.A., Podloznyj EH.D., Naumenko N.N. Plazmennoe oplavlenie stroitel'nyh kompozitov. M.: Izd-vo ASV; Ivanovo: IGASU, 2009. 228 p. (rus.)
3. Bessmertnyi V.S., Krokhin V.P., Panasenko V.A., Nikiforov V.M., Shvyrkina O.N. Glazed wall ceramics using kmawaste. Glass and ceramics. 1998. 55 (7-8). P. 222 – 223.
4. Voloshko N.I., Koval'chenko N.A., Zdorenko N.M., Kupavcev EH.I. Povyshenie korrozionnoj stojkosti betonnyh izdelij metodom plazmennoj obrabotki. Mezhdunarodnyj zhurnal ehksperimental'nogo obrazovaniya. 2017. 1. P. 114. (rus.)
5. Bessmertnyi V.S., Seroshtan M.V., Lyashko A.A., Krokhin V.P., Parshin N.M. Glazed wall ceramics with improved physicomechanical and decorative propenties. Glass and ceramics. 1999. 57 (5-6). P. 169 – 171.
6. Zdorenko N.M., Bondarenko N.I., Borisov I.N., Izofatova D.I., Dorokhova E.S. Increase of competitiveness of wall construction materials with use of plasma technologies. International Journal of Applied and Fundamental Research. 2014. 2.
7. Bolelli G., Lusvarghi L., Maufredini T., Siligardi C. Influence of the manufacturing process of the crystallization behavior of a Czs glass system. Journal of Non-Crystalline Solids. 2005. 351 (30-32). P. 2537 – 2546.
8. Bolelli G., Cannillo V., Lusvarghi T., Manfredini T., Siligardi C., Bartuli C., Loreto A., Valente T. Plasma – sprayed glass-ceramic coatings on ceramic tiles:nicrostructure, chemical resistanace and mechanical pro-prties. Jonrnal of the Eukopean Ceranic Sociaty. 2005. 25 (11). P. 1835 – 1853.
9. Gerdvis I.A. Nauchnye osnovy tekhnologii keramicheskogo glazurovaniya betonnyh izdelij. Tr. NII «Strojkeramika», 1973. 37. P. 83 – 101. (rus.)
10. Bessmertny V.S., Min'ko N.I., Bondarenko N.I., Simachev A.V., Zdorenko N.M., Rozdolskaya I.V., Bondarenko D.O. Evaluation of the competitiveness of wall building materials with glassy protective-decorative coatings obtained by plasma fusing. Glass and Ceramics. 2015. 72 (1-2). P. 41 – 46.
11. Buyantuev S.L., Bylkova N.V., Zayahanova M. E. Zashchitno-dekorativnye pokrytiya na stroitel'nyh izdeliyah s ispol'zovaniem syr'evyh materialov Buryatii. Stroitel'nye materialy. 2002. 8. P. 22 – 23. (rus.)
12. Bondarenko D.O., Bondarenko N.I., Bessmertnyi V.S., Burlakov N.M. Plasma-chemical modification of concrete processed by colorific metal salts. Advances in Engineering Research. 2017. 133. P. 128 – 134.
13. Zdorenko N.M., Izotova I.A., Strokova V.V., Bondarenko D.O., Gashchenko EH.O., Antropova I.A. Plazmohimicheskoe modificirovanie steklokristallicheskogo kompozicionnogo materiala. Mezhdunarodnyj zhurnal ehksperimental'nogo obrazovaniya. 2017. 8. P. 50. (rus.)
14. Fedosov S.V, Akulova M.V., Koshelev E.V. Zakreplenie plazmooplavlennogo steklovidnogo dekorativnogo sloya na betone s pomoshch'yu propitok. Nauchnyj Vestnik Voronezhskogo gosudarstvennogo arhitekturno-stroitel'nogo universiteta. 2008. 3. P. 44 – 49. (rus.)
15. Koval'chenko N.A., Zdorenko N.M., Burlakov N.M., Karajchencev R.S. Plazmennoe napylenie cvetnyh metallov na izdeliyah stenovoj keramiki. Mezhdunarodnyj zhurnal ehksperimental'nogo obrazovaniya. 2016. 11-1. P. 81. (rus.)
16. Zdorenko N.M., Il'ina I.A., Bondarenko N.I., Borisov I.N., Izofatova D.I. Formirovanie kachestva i konkurentosposobnosti stenovyh stroitel'nyh materialov avtoklavnogo tverdeniya. Sovremennye naukoemkie tekhnologii. 2014. 10. P. 120. (rus.)
17. Bazhenov YU.M., Fedosov S.V., SHCHepochkina YU.A., Akulova M.V. Vysokotemperaturnaya otdelka betona steklovidnymi pokrytiyami. M.: Izd-vo ASV, 2005. 128 p. (rus.)
18. Zdorenko N.M., Kovalchenko N.A., Izofatova D.I. Innovative plasma technology of receipt of protective and decorative coverings on the block foamglass. International Journal of Applied and Fundamental Research. 2016. 2. P. 19. (rus.)
19. Zdorenko N.M., Il'ina I.A., Bondarenko N.I., Gashchenko EH.O., Bondarenko D.O., Izofatova D.I. Zashchitno-dekorativnye pokrytiya dlya stenovyh stroitel'nyh materialov avtoklavnogo tverdeniya. Mezhdunarodnyj zhurnal ehksperimental'nogo obrazovaniya. 2015. 9. P. 81 – 82. (rus.)
20. Bondarenko N.I., Bessmertnyj V.S., Borisov I.N., Timoshenko T.I., Burshina N.A. Betony s zashchitno-dekorativnymi pokrytiyami na osnove alyuminatnyh ogneuporov, oplavlennye plazmennoj struej. Vestnik Belgorodskogo gosudarstvennogo tekhnologicheskogo universiteta im. V. G. SHuhova. 2016. 2. P. 181 – 185. (rus.)
21. Fedosov S.V., Akulova M.V., Fedosov S.V., Slizneva T.E., Ahmadulina YU.S., Padohin V.A., Bazanov A.V. Svojstva ogneupornyh kompozitov na mekhanoaktivirovannom rastvore silikata natriya. Vestnik MGSU. 2012. 1. P. 57 – 62. (rus.)
Bessmertny V.S., Puchka O.V., Bondarenko D.O., Antropova I.A., Bragina L.L. Plasmochemical modification of wall building materials. Construction Materials and Products. 2018. 1 (2). P. 11 – 18. https://doi.org/10.34031/2618-7183-2018-1-2-11-18