INCREASING THE STRENGTH AND FROST RESISTANCE OF CERAMIC PRODUCTS AT USING MELASSES BARDS AS PLASTICIZER

https://doi.org/10.34031/2618-7183-2018-1-2-19-29
Ways of production of ceramic materials with use as the plasticizing additive of the sulphitic and alcohol bards (SAB), the calcium citrate filtrate (CCF) which is liquid withdrawal of production of citric acid in the microbiological way are known. However introduction to raw mix of CoB reduces forming humidity and fall of the formed products insufficiently, and an essential lack of FTsK is the low durability of products on compression with a big volume mass of samples.
In work the possibility of use as the plasticizing additive to a clay lot of withdrawal of the spirit industry – melasses bards is investigated. As a part of molasses the remains of amino acids and other organic substances which have the plasticizing effect on clay materials contain. On the example of natural clays of three various fields the plasticizing action melasses bards is proved, and the number of plasticity of the studied clays increases in direct ratio to increase in additive melassny bards in clay raw mix. It is shown that introduction to raw mix melasses bards leads to improvement of appearance of pottery, decrease in jointing, increase in durability for Veselovsky clay for 7%, for the Oryol clay for 67%, for Bessonovskaya – for 23%.
Research of the received ceramic samples on frost resistance according to requirements of GOST bards unlike the products which aren’t containing additive bards showed high frost resistance of products with additive melass. Also lowered decrease in durability and loss of mass of the samples containing additive melassny bards is noted.
1. Pozhidaev D.A., Gulyaev V.T., Maksimov L.I. Obtaining the zeolite glaze on ceramic products. International Journal of Applied Engineering Research. 2016. 11 (20). P. 10252 – 10256.
2. Stepovoj A.V., Doroganov V.A., Evtushenko E.I. Keramicheskie kompozity VIII-X v.v. n.eh. ispol'zuemye v drevnej metallurgii na territorii Belgorodskoj oblasti. Vestnik BGTU im. V.G. SHuhova. 2014. 3. P. 125 – 130. (rus.)
3. Yang L., Miyanaji H. Ceramic additive manufacturing: a review of current status and challenges. Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. P. 652 – 679.
4. Othman R., Sarif T.T.B., Ahmad Z.A., Noor A.F.M., Aramjat A.B. Influence of clay mineralogy on clay-based ceramic products. Asian conference on x-rays and related techniques in research and industry (ACXRI96). 1996. P. 247 – 253.
5. Mačiulaitis R., Kičaite A. Peculiarities of destruction mechanism in ceramic products under simulated exploitation conditions. Material science. 2006. 12 (4). P. 341 – 345.
6. Budnikov P.P., Poluboyarinov D.N. Himicheskaya tekhnologiya keramiki i ogneuporov. M.: Izdatel'stvo literatury po stroitel'stvu, 1972. 553 p. (rus.)
7. Sverguzova S.V., Tarasova G.I., Timohina V.V., Kozlov V.P., Naumov E.G. ZHidkie othody proizvodstva limonnoj kisloty v keramicheskih massah. EHkologiya i promyshlennost' Rossii. 2000. oktyabr'. P. 21 – 23. (rus.)
8. Sapronova ZH.A., Sverguzova S.V., Fetisov R.O., SHamshurov A.V., SHajhiev I.G. Osadok vodoochistki kak poroobrazuyushchaya dobavka k keramicheskim smesyam. Vestnik Kazanskogo tekhnologicheskogo universiteta. 2012. 7. P. 137 – 139. (rus.)
9. Sargsyan H., Trchounian K., Gabrielyan L., Trchounian A. Novel approach of ethanol waste utilization: Biohydrogen production by mixed cultures of dark- and photo-fermentative bacteria using distillers grains. International Journal of Hydrogen Energy. 2016. 41 (4). P. 2377– 2382.
10. Kizinievič O., Kizinievič V. Utilisation of drinking water treatment sludge for the manufacturing of ceramic products. IOP Conference Series: Materials Science and Engineering. 2017. 251.
11. Bulanov P.E., Mavliev L.F., Vdovin E.A., YAgund EH.M. Vzaimodejstvie kaolinovoj i bentonitovoj glin s plastificiruyushchimi poverhnostno-aktivnymi veshchestvami. Inzhenerno-stroitel'nyj zhurnal. 2017. 7. P. 171 – 179. (rus.)
12. SHal' B.V., Petrov V.P., Eremenko V.V. i dr. Issledovanie ehffektivnosti proizvodstva keramzitovogo graviya s poroshkovoj podgotovkoj kamnepodobnogo syr'ya. Tr. VNIISTROM, 1977. 10. P. 28 – 34. (rus.)
13. YUshkevich M.O., Rogovoj M.I. Tekhnologiya keramiki. M.: Strojizdat, 1969. 350 p. (rus.)
14. Copyright Certificate AS № 798070, SSSR, MKI s04V21/00. Meshcheryakov YU.G., Rossman M.YA. Syr'evaya smes' dlya izgotovleniya poristyh keramicheskih materialov. (rus.)
15. Rybachuk V.N. Kompleksnoe ispol'zovanie syr'ya v spirtovoj promyshlennosti. Spirtovaya promyshlennost'. 1981. 6. (rus.)
16. EHlinzon M.P., Vasil'kov S.G. Toplivosoderzhashchie othody promyshlennosti v proizvodstve strojmaterialov M.: Strojizdat, 1980. 323 p. (rus.)
17. Frolov YU.G. Kurs kolloidnoj himii (poverhnostnye yavleniya i dispersnye sistemy). M.: Himiya, 1982. 400 p. (rus.)
18. Fridrihsberg D.A. Kurs kolloidnoj himii. SPb: Himiya. 1995. 400 p. (rus.)
19. Russian State Standart GOST 21216.1-93. Syr'e glinistoe. Metod opredeleniya plastichnosti. M.: Standartinform, 2000. 7 p. (rus.)
20. Russian State Standart GOST 9169-75. Syr'e glinistoe dlya keramicheskoj promyshlennosti. M.: IPK izd-vo standartov. 2001. 7 p. (rus.)
21. Angenickaya R.B. Ol'shanskaya Z.I. Rukovodstvo po ispytaniyu glin proizvodstva keramicheskih materialov Kiev: Budivel'nik, 1977. 210 p. (rus.)
22. Russian State Standart GOST 7025-91. Kirpich i kamni keramicheskie i silikatnye. Metody opredeleniya vodopogloshcheniya, plotnosti i kontrolya morozostojkosti. M.: Standartinform, 2000. 12 p. (rus.)
23. Russian State Standart GOST 530-95. Kirpich i kamni keramicheskie. Tekhnicheskie usloviya. M.: IPK Izd-vo standartov, 1996. 19 p. (rus.)
24. Russian State Standart GOST 8462-85. Materialy stenovye. Metody opredeleniya predelov prochnosti pri szhatii i izgibe. M.: IPK Izd-vo standartov, 2001. 7 p. (rus.)
Sverguzova S.V., Shaykhiev I.G., Tom Otiti, Sapronova Zh.A. Increasing the strength and frost resistance of ceramic products at using melasses bards as plasticizer. Construction Materials and Products. 2018. 1 (2). P. 19 – 29. https://doi.org/10.34031/2618-7183-2018-1-2-19-29