Energy-efficient building ceramics with reduced firing temperature based on shomishkul kaolin and berkutau basalt
Abstract
This study investigates ceramic facing materials based on Shomishkul kaolin, Berkutau basalt, and Tabakkum dune sand, with particular emphasis on lowering the peak firing temperature as a practical route to improving production energy efficiency. The fluxing behavior of Berkutau basalt was compared with that of Kazgansay feldspar. The chemical composition of the raw materials, onset and completion temperatures of melting, shrinkage, water absorption, flexural strength, frost resistance, phase composition, and microstructure were evaluated. The total Na2O+K2O content of Berkutau basalt is 12.07 wt.%, which is comparable to that of Kazgansay feldspar (12.95 wt.%); however, the basalt contains substantially higher amounts of Fe2O3 and CaO. The onset and completion temperatures of melting for the raw basalt are 1093 and 1165 °C, respectively, compared with 1380 and 1400 °C for feldspar. At an additive content of 30 wt.%, the onset of melting is 1195 °C for the kaolin-basalt composition and 1361 °C for the kaolin-feldspar system. The optimized KBP-20 to KBP-22 compositions fired at 1100 °C exhibit water absorption of 7.3-8.4%, shrinkage of 3.4-4.5%, and flexural strength of 17.6-19.4 MPa. Increasing the firing temperature to 1150 °C does not substantially improve the principal physical and mechanical properties and is accompanied by increased overall shrinkage. The results support the use of Berkutau basalt as a natural fluxing component and indicate that the peak firing temperature can be reduced by approximately 40-50 °C relative to a conventional feldspar-containing ceramic body. This provides a clear technological basis for reducing kiln thermal demand and improving production energy efficiency.

English
Русский